Bently Nevada 330709-000-080-50-02-00 3300 XL 11 mm Proximity Probe

产品 Introduction

The Bently Nevada 330709-000-080-50-02-00 is a 3300 XL 11 mm proximity probe designed for accurate measurement of radial vibration and axial position in rotating machinery. This model features an M16 x 1.5 thread, no armor, and a 5.0-meter cable with a miniature coaxial ClickLoc connector. It is part of the trusted 3300 XL series, engineered for durability and precision in industrial environments.

Technical Parameters

• Probe Length: 5.0 meters (16.4 feet)
• Unthreaded Length: 0 mm
• Overall Case Length: 80 mm
• Thread Size: M16 x 1.5
• Probe DC Resistance (RPROBE): 7.2 ± 0.8 ohms
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel
• Cable: 75 Ω triaxial, FEP insulated
• Operating Temperature: -52°C to +177°C (-62°F to +351°F)
• Recommended Torque: 21.1 N•m (187 in•lb)
• Maximum Torque: 63.3 N•m (560 in•lb)

参数 Analysis

The 5.0-meter probe length is specifically designed for use with the five-meter Proximitor sensor, ensuring optimal signal integrity. The miniature coaxial ClickLoc connector provides secure and reliable connections. The probe’s DC resistance of 7.2 ± 0.8 ohms is within the specified range for accurate eddy-current sensing. The PPS tip and stainless steel case offer excellent environmental resistance.

应用 Scenarios

This 330709-000-080-50-02-00 probe is ideal for monitoring vibration and position in turbines, compressors, pumps, and other rotating machinery. It is commonly used in critical applications where precise measurement is essential for predictive maintenance and machine protection.

Installation Guide

Ensure the probe is mounted with the recommended torque of 21.1 N•m (187 in•lb) and not exceeding 63.3 N•m (560 in•lb). The thread engagement length should be a maximum of 24 mm. Maintain a minimum bend radius of 25.4 mm (1.0 in) for the cable. For optimal performance, follow the target size and shaft diameter recommendations: minimum flat surface diameter of 30.5 mm and minimum shaft diameter of 152 mm.

Compatibility

This probe is designed for use with Bently Nevada 3300 XL systems and is compatible with the five-meter Proximitor sensor. It is not compatible with other Proximitor lengths.

Maintenance Advice

Regularly inspect the probe and cable for damage. Avoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature failure of the pressure seal. Clean the probe tip with a soft cloth and approved solvent if contamination occurs.

Procurement Advice

When ordering the 330709-000-080-50-02-00, verify the model number and specifications to ensure it meets your application requirements. Consider purchasing spare probes to minimize downtime. 授权 Bently Nevada channels like TenBN offer genuine products and technical support.

常见问题

What is the probe length of this model?

The total length is 5.0 meters (16.4 feet).

Can this probe be used with any Proximitor?

No, it is designed for use with the five-meter Proximitor sensor only.

What is the maximum operating temperature?

The operating temperature range is -52°C to +177°C (-62°F to +351°F).

What is the recommended installation torque?

The recommended torque is 21.1 N•m (187 in•lb), with a maximum of 63.3 N•m (560 in•lb).

Is this probe armored?

No, this model is without armor.